Wide range of accessories used in day-to-day operations. Wide hose protection range including steel wire guard and polypropylene spiral wraps used to prolong the life of hydraulic hoses. Clips and clamps including the double block and single block clamps for securing hoses as well as Mikalor single bolt hose clamps, ear clips and jubilee clips. Filter and tan accessories, pressure gauges and test equipment and much more.
Max working 1 bar (14,5 psi)
Metric – Tightening torque 10 Nm
-20° + 80°C
double scale 0 °C ÷ 100 °C 30 °F ÷ 210 °F
Heads: polyammide
Protection: anodized aluminium
Screws: zinc plated
Seals: NBR
Clamp set consists of:
2 x clamp halves:
1 x cover plate:
1 x hexagon head bolt
1 x single weld plate
Clamp set consists of:
2 x clamp halves:
1 x cover plate:
2 x hexagon head bolt
1 x single weld plate
Mikalor hose clips for medium pressure general industrial applications where a robust and competitively priced clip is called for. Especially recommended for use in agriculture and in fluid transfer applications.
The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.
Mikalor Super clamps are used in agricultural applications, waste water extraction, mining, quarrying or in other sectors where a rugged yet competitively priced heavy-duty single bolt clamp is required.
The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling.
NITO® is a heavy-duty spray gun suitable for various applications, mostly used as a wash down gun on farms and in food industries.
This product is not suitable to work with steam.
PRESSURE SWITCH 1/4″ BSP MALE THREAD PRE-SET 180BAR
PRESSURE SWITCH 1/8″ BSP MALE THREAD PRE-SET 180BAR
High pressure spray gun lance sets including lance, nozzle and trigger gun.
1/4″ BSPP male end on the lance and trigger gun with 3/8″ BSPP brass Female thread.
PW5661-6
PW5662-6
Max available coil length: Please see below.
For ranges of individual guards check product gallery.
Steel wire guard is not suitable for already assembled hoses.
It is recommended to use it before crimping process.
Max available length: 5 mt
Retractable air hose reel
Length: 15mt
Hose Size: 3/8″
Working Pressure: 20 bar
Maximum Pressure: 60 bar
Heavy-duty steel construction with power-coated for the highest quality paint adhesion.
Integrated and strengthened main axis provide better pressure bearing capacity.
5-layer industrial heavy duty nitrile rubber hose.
Non-snag four direction rollers reduce hose wear abrasion.
Suitable for: FR140C10BB60C0
Filter media: impregnated paper
Efficiency: 10 µm (c) β= 2
Collapse pressure: 3 bar
By-pass valve: SI
By-pass setting: 1,7 bar
Flow direction: OUT-IN
Seals: NB
Return filter for mounting on the tank lid. Filter element with inbuilt bypass valve. Flow rates up to 600 l/min.
Model: FR140C10BBB60C000
Head and cover: aluminium alloy
Bowl: PA6 reinforced
Seal: NBR
Baypass valve: 1.7 bar
Connection port: 1 1/4″
Filter media: paper ß10µm(c) > 2
Differential collapse pressure: 10 bar
Operating temperature range: -25°C + 100°C
Indicator port: 1/8″ plugged
Clogging indicators: no indicator included
Electromechanical level indicator- temperature intank switch suitable for use with ASA Hydraulik coolers.
Technical Features:
Working temperature: -10°C ÷ +90°C
Maximum inclination: 15°
Max viscosity of the fluid: 150 cSt
Mechanical life: 106
cycles at 20°C
Body: in anodized aluminium with wetted part in stainless steel 316L (rod) and spancil pom (float)
Installation: must be least at 50mm away from ferrous walls and far from magnetic fields and in vertical position by 3 different types of hydraulic connection in only one execution:
– two holes flange (180°)
– three holes flange (120°)
– threaded 1”BSP-M
Electrical Features:
– Electrical connection according to DIN43650, M3
– Electrical protection according to DIN40050, IP65
– Exchange contacts (Common, NO and NC) – SPDT (simple contact for version with thermometer)
– Maximum load: 0.2A at 30VAC/VDC
No products in the basket.