Pressure Gauges, Test Equipment & Accumulators

  • hydraulicplanet The 0.7LIT ACCUMULATOR is a black cylindrical device with a label, warning texts, and green and red caps on opposite ends, shown against a white background.

    0.7LIT ACCUMULATOR

    157.50 + vat

    SPEC SHEET.pdf

    0.7LIT Accumulator Pre-Charged to 30BAR 1/2″ BSP

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The 100MM DIAMETER GLYCERINE FILLED PRESSURE GAUGE displays psi and bar readings, has a brass bottom connector, and features a logo in the lower right corner.

    100MM DIAMETER GLYCERINE FILLED PRESSURE GAUGE

    37.50 + vat
    • Case and bezel : stainless steel AISI 304
    • Window : shatter resistant acrylic
    • Damping liquid : bi-distilled glycerine
    • Connection : brass. G1/2″ BSP male threaded
    • Sensitive element : copper alloy bourdon tube up to 70 bar, phosphor bronze for pressure from 100 to 690 bar.
    • Mechanism : high-precision watchmakers’ brass
    • Joints : soldered in tin alloy or silver alloy for pressure above 60 bar
    • Indicator : tempered steel
    • Dial : stoved enamel on aluminium
    • Accuracy : class 1.6
    • Scale : psi (outer) + bar (inner)
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The 63MM DIAMETER GLYCERINE FILLED PRESSURE GAUGE displays psi and bar readings, has a bottom brass connector, and features the Hydraulic Planet logo in the corner.

    63MM DIAMETER GLYCERINE FILLED PRESSURE GAUGE

    12.50 + vat
    • Case and bezel: stainless steel AISI 304.
    • Window: shatter resistant acrylic.
    • Damping Liquid: bidistilled glycerine.
    • Connection: brass. G1/4″ BSP or NPT Male threaded.
    • Sensitive element: Copper alloy Bourdon tube up to 70 bar, phosphor bronze for pressure from 100 to 690 bar.
    • Mechanism: high precision watchmakers brass.
    • Joints: soldered in tin alloy or silver alloy for pressure above 60 bar.
    • Indicator: tempered steel.
    • Dial: stoved enamel on aluminium.
    • Accuracy: class 1.6.
    • Scale: PSI/ bar
    • Operating temperature: -20°C/ + 60°C
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The ACCUMULATOR CLAMP - CRE SERIES features a metal and rubber cushion with two mounting holes, ideal for securely fastening pipes or cables to flat surfaces.

    ACCUMULATOR CLAMP – CRE SERIES

    15.00 + vat

    Bracket for H700R

    SPEC.pdf

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The ACCUMULATOR CLAMP - CRO SERIES features a metal body with rubber lining, adjustable screw, and flat base with two slotted holes for easy installation—ideal for securing accumulators in various piping systems.

    ACCUMULATOR CLAMP – CRO SERIES

    29.95 + vat
    • SPEC.pdf
    • Bracket For H1400R Accumulator
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The BSP INLINE TEST POINT TEE ADAPTOR is a metal hydraulic fitting with hexagonal ends and a central threaded port, displayed on a white background featuring the Hydraulic Planet logo in the corner.hydraulicplanet A technical product sheet for FLANGE CODE 62 - 6000 PSI BSP inline test point tee adaptors features images, specs, key features, and full ordering info, including hydraulic flange options rated up to 6000 PSI.

    BSP INLINE TEST POINT TEE ADAPTOR

    Price range: €3.00 through €8.88 + vat
    • BSP parallel male x swivel female (60° cone sealing) test point adaptor with fitted Minimess test point.
    • Suitable for OEM build or retro-fitting to existing systems, SNAs fit between hose joints or manifold and hose/
    • Leak free up to 630 bar
    • Connect and disconnect under full system pressure

     

     

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet A close-up of a PRESSURE SWITCH with a 1/4" BSP male thread, featuring a black connector, blue middle section, and silver metal base labelled “FOX” and “ITALY.”.hydraulicplanet The PRESSURE SWITCH 1/4" BSP MALE THREAD has a black connector, blue base, and silver fitting, shown upright on a white background with a gear and spanner logo in the corner.

    PRESSURE SWITCH 1/4″ BSP MALE THREAD

    30.00 + vat

    PRESSURE SWITCH 1/4″ BSP MALE THREAD PRE-SET 180BAR

    Spec Sheetpdf

  • hydraulicplanet PRESSURE SWITCH 1/8" BSP MALE THREAD with black electrical connector and blue label for specs, manufactured by Fox S.r.l. Italy.

    PRESSURE SWITCH 1/8″ BSP MALE THREAD

    30.00 + vat

    PRESSURE SWITCH 1/8″ BSP MALE THREAD PRE-SET 180BAR

    Spec sheet

  • temperature switch imagehydraulicplanet Technical datasheet for TEMPERATURE & LEVEL INTANK SWITCH includes product specs, key features, wiring diagrams, dimensional drawings, and the Hydraulic Planet website at the bottom.

    TEMPERATURE & LEVEL INTANK SWITCH

    Price range: €90.00 through €126.32 + vat

    Electromechanical level indicator- temperature intank switch suitable for use with ASA Hydraulik coolers.

    Technical Features:
    Working temperature: -10°C ÷ +90°C
    Maximum inclination: 15°
    Max viscosity of the fluid: 150 cSt
    Mechanical life: 106
    cycles at 20°C
    Body: in anodized aluminium with wetted part in stainless steel 316L (rod) and spancil pom (float)
    Installation: must be least at 50mm away from ferrous walls and far from magnetic fields and in vertical position by 3 different types of hydraulic connection in only one execution:
    – two holes flange (180°)
    – three holes flange (120°)
    – threaded 1”BSP-M

    Electrical Features:
    – Electrical connection according to DIN43650, M3
    – Electrical protection according to DIN40050, IP65
    – Exchange contacts (Common, NO and NC) – SPDT (simple contact for version with thermometer)
    – Maximum load: 0.2A at 30VAC/VDC

     

     

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet TEST POINT hydraulic quick release coupling with protective cap attached by a chain, shown on a white background with the Hydraulic Planet logo.hydraulicplanet TEST POINT technical data sheet includes a labelled diagram, material specs, sealing details, temperature and pressure rating tables, and threaded port size charts.

    TEST POINT

    Price range: €3.37 through €5.98 + vat

    1620 Minimess test point with metal cap and anti vibration O-ring.

    • Max. working pressure: 63 Mpa (630 bar) according to ISO 15171-2
    • Material: Free cutting steel coupling body and cap (1.0718)
    • Sealing: NBR
    • Vibration: NBR
    • Screw in thread: BSP
    • Media application: hydraulic and other oils of a mineral oil basis
    • Temperature ranges for applications with metal cap (standard): -25°C to +100°C, for a short time, can be also used up to +120°C

     

     

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page