Valves

  • hydraulicplanet 90° Adaptor BSPP Male - BSPP Male with adjustment screws and a protruding hexagonal fitting, shown on a white background featuring the Hydraulic Planet logo.3 PORT FLOW CONTROL VALVE (ONGOING PRESSURE LINE)

    3 PORT FLOW CONTROL VALVE (ONGOING PRESSURE LINE)

    Price range: €85.40 through €170.00 + vat

    Use and Operation
    This valve enables to keep “P” flow constant to a certain setting, independently of the required pressure or the inlet flow of the valve.

    Exceeded flow is drained in “B” and it is available for a second use.

    Port “B” is insensitive to pressure changes but not to flow changes.

    Materials and Features

    • Body: zinc-plated steel – aluminium (VPR3 1)
    • Internal Parts: hardened and ground steel
    • Seals: BUNA N standard
    • Tightness: by diameter combination. Minor leakage (few drops per minute)

    Applications
    Connect E to the pressure flow. Connect P to the actuator or to a line of an hydraulic circuit where flow adjustment is needed.

    Connect B to the tank or to a second actuator.

    To adjust inlet pressure in P screw in or off hand wheel after loosening the locknut.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The 3/4" TWO PUMP "HI-LOW" UNLOADING VALVE features multiple ports and connectors, is rectangular, labelled "VABP 3/4," and is positioned above the Hydraulic Planet logo.3/4″ TWO PUMP “HI-LOW” UNLOADING VALVE

    3/4″ TWO PUMP “HI-LOW” UNLOADING VALVE

    €130.00 + vat

    Use and Operation
    This valve is used in a 2 parallel-working pumps circuit in order to release the excess of the higher flow pump to the tank when this gets the required pressure setting. Since this moment and on the actuator works with the lower flow pumps at higher pressure, consuming less energy.

    Materials and Features

    • Body: zinc-plated steel
    • Internal Parts: hardened and ground steel
    • Seals: BUNA N standard
    • Tightness: minor leakage

    Applications:

    Connect BP to the higher flow pump, AP to the lower flow pump, T to the tank, M to the eventual manometer and U as for necessity.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet Metal hydraulic flow control valve with a blue adjustment knob, marked "VRFU90° 3/8," shown on a white background with a "Hydraulic Planet" watermark.90° FLOW REGULATOR VALVE

    90° FLOW REGULATOR VALVE

    €19.00 + vat

    Use and Operation
    This valve is used to adjust flow speed of actuators in one direction; flow is free in the reverse one. As pressure compensation is not provided, flow adjustment depends on pressure and fluid viscosity. High adjustment sensitivity.

    Materials and Features

    • Body: zinc-plated steel
    • Internal Parts: hardened and ground steel
    • Seals: BUNA N standard
    • Poppet Type: needle type. Minor leakage with closed valve.

    Applications
    Connect V to the pressure flow and C to the actuator to set; flow is adjust from C to V and is free in the reverse direction. When used on actuator with double pilot check valve, VRFU 90° has to be mounted between the actuator and the double pilot check valve. Flow adjustment is made by rotating the plastic hand knob after loosening the side locking screw. This particular configuration allows an accurate and sensitive adjustment.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The BLB BF901 LEVER VALVE COMPLETE WITH BUILT-IN FLOW CONTROL features a black handle, multiple ports, and a metallic body for dependable hydraulic flow management, shown isolated on a white background.hydraulicplanet Technical drawing of the BLB BF901 LEVER VALVE COMPLETE WITH BUILT-IN FLOW CONTROL, featuring labelled dimensions and the Hydraulic Planet logo positioned at the top left.

    BLB BF901 LEVER VALVE COMPLETE WITH BUILT IN FLOW CONTROL

    €295.00 + vat

    BLB BF901 single lever valve complete with built in flow control.

    • Single section valve
    • Flow 90 l/min
    • Ports threads 3/4” BSP / SAE 12
    • 2 Inlet and Outlet ports
    • Prepared for High pressure Carry Over (Power Beyond)
    • Manufactured by BLB
    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • BLB BM100 3/4" ROTARY VALVEhydraulicplanet Technical drawing of the BLB BM100 3/4" ROTARY VALVE hydraulic control valve with lever, ports, and fittings, featuring the Hydraulic Planet logo in the lower right-hand corner.

    BLB BM100 3/4″ ROTARY VALVE

    €243.00 + vat

    Rotary valves are a standard in winch applications across the marine industry.

    Rotary lever flow control in conjunction with excellent spool metering to precisely control the winch speed.

    The valves feature environmental protection of external and internal components to withstand harsh on-deck conditions.

    Our BM100 version 3/4″ ported is capable of handling flows up to 90 l/min.

    Max Pressure: 300 bar

    Nominal Pressure: 250 bar

    Nominal Flow: 90 l/min

    Ports: 3/4″ (A-B, P, T, P2, T2)

    Double acting.

    Spring centre.

    Alternative code: 930181 BM100

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • BLB BM150 monobloc control single lever valvehydraulicplanet Technical data sheet for the BLB BM150 MONOBLOCK CONTROL LEVER VALVE MAX 180L/MIN detailing specs, dimensions, performance graphs, auxiliary valve options, and standard thread types in a clear, structured layout.

    BLB BM150 MONOBLOCK CONTROL LEVER VALVE MAX 180L/MIN

    €225.00 + vat

    BLB BM150 monobloc control single lever valve.

    • Single section valve
    • Max flow 180 l/min
    • Ports A+B +P +T 3/4″  P1 + P2  1”
    • 2 Inlet and Outlet ports
    • Prepared for High pressure Carry Over (Power Beyond)
    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet Single-spool hydraulic control valve with a long lever and multiple ports, shown against a white background with a semi-transparent "Hydraulic Planet" logo.hydraulicplanet Technical drawing and ordering code chart for P120 SERIES MONOBLOCK CONTROL VALVES, including diagrams, measurements, lever options, and configuration codes.

    P120 SERIES MONOBLOCK CONTROL VALVES

    Price range: €115.00 through €330.00 + vat

    Nominal flow rate: 120 liter/min
    Max. Pressure: P: 250 bar, T: 50 bar, A-B: 300 bar
    Spool type: Standard open center spool (A spool), different spool options
    Number of spools: From 1 to 4
    Leakage: 8 cm3/min at 100 bar (From A,B to T)
    Fluid temperature range: -10 oC … +80 oC
    Working fluid: Mineral based hydraulic oil
    Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
    Filtration: 10 to NAS 1638

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet A P40 SERIES MONOBLOCK CONTROL VALVE with black handles and multiple connection ports is displayed against a white background.hydraulicplanet Technical diagram and ordering code chart for P40 SERIES MONOBLOCK CONTROL VALVES, featuring valve illustrations, dimensions, and a table with configuration options.

    P40 SERIES MONOBLOCK CONTROL VALVES

    Price range: €41.00 through €210.00 + vat

     

    Nominal flow rate: 40 l/min
    Max. Pressure: P: 315 bar, T: 50 bar, A-B: 300 bar
    Spool type: Standard open center spool (A spool), different spool options
    Number of spools: From 1 to 7
    Leakage: 5 cm3/min at 100 bar (From A,B to T)
    Fluid temperature range: -10 oC … +80 oC
    Working fluid: Mineral based hydraulic oil
    Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
    Filtration: 10 to NAS 1638

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The 90° ADAPTOR MALE BSPP - SWIVEL FEMALE BSPP (BLOCK) is shown with a multi-spool hydraulic control valve featuring six black-handled levers and several red and silver ports, all set against a white background.hydraulicplanet Technical diagram of P80 SERIES MONOBLOCK CONTROL VALVES assembly showing labelled parts, ordering codes, and specification tables in both Turkish and English.

    P80 SERIES MONOBLOCK CONTROL VALVES

    Price range: €57.00 through €216.00 + vat

    Nominal flow rate: 80 liter/min
    Max. Pressure: P: 315 bar, T: 50 bar, A-B: 300 bar
    Spool type: Standard open center spool (A spool), different spool options
    Number of spools: From 1 to 6
    Leakage: 6 cm3/min at 100 bar (From A,B to T)
    Fluid temperature range: -10 oC … +80 oC
    Working fluid: Mineral based hydraulic oil
    Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
    Filtration: 10 to NAS 1638

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet The P81 SERIES LOG SPLITTER VALVE features red caps and a metal lever handle, shown on a white background with the Hydraulic Planet logo partially visible.

    P81 SERIES LOG SPLITTER VALVE

    €65.90 + vat

    On/Off directional control mono-block valve- P81 log splitter valve is directing the working fluid between pumps and consumers (hydraulic cylinders, motors, etc.) and the tank.

    Spring centered in one direction with pressure released detent in the other direction. It automatically kicks back to neutral when the cylinder completes the stroke. Also includes a built-in adjustable inlet relief valve.

    Hydraulically balanced, hard chrome plated spool

    Lever system in which the handle can be installed in up or down position

    Detent release pressure adjustable from 70 to 140 bar

    In neutral position both work ports are blocked and the pump unloads to the tank.

     

    • Nominal flow rate: 80 liter/min
    • Inlet: 3/4″ BSP
    • Outlet: 3/4″ BSP
    • Max. Pressure: P: 250 bar, T: 10 bar, A-B: 300 bar
    • Spool type: Standard open center spool (A spool)
    • Number of spools: Single lever
    • Leakage: 20 cm3/min at 120 bar (From A,B to T)
    • Fluid temperature range: -10 oC … +80 oC
    • Working fluid: Mineral based hydraulic oil
    • Viscosity: 10-100 cSt (46 cSt mineral based hydraulic oil is recommended, may vary in different climates)
    • Filtration: 10 to NAS 1638
    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • hydraulicplanet Close-up of a HIGH PRESSURE 3 WAY DIVERTER VALVE with three red-capped ports and metallic parts. The Hydraulic Planet logo appears in the background.hydraulicplanet A TRACTOR FRONT LOADER VALVE for open centre systems, black with red and silver fittings, is set on a white background with the Hydraulic Planet logo partially visible.

    TRACTOR FRONT LOADER VALVE- OPEN CENTRE- FOR OPEN CENTRE SYSTEMS

    €350.00 + vat

    2 section monoblock directional control valve with floating section suitable for hydraulic systems with fixed displacement pumps (open centre circuit) applications: front-end loader.

    • Manufactured in 2 sections with circuit in parallel
    • Nominal flow rate 80 l/min
    • Max working pressure 250 bar
    • Max return back pressure 10 bar
    • Including check valve for each section
    • Preset for CARRY-OVER
    • Working temperature -30°C ÷ max. 80°C
    • Max spool leakage at 100 bar (Temp. 50°C Visc. 27 CST) is 3 ml/min
    • Weight 15,300 kg

    Read more about closed and open hydraulic systems

    Select optionsDone This product has multiple variants. The options may be chosen on the product page